Related Articles
How to Post-Process Apache 3 data
Prerequisites: Hydrosurvey（version 2021/12/16 or above） Hydrosurvey projects Steps: 1. Handle the wrong depth a. Go to ‘Depth sample’ interface b. Delete the obviously wrong depth from the dep files list one by one. Double click the dep ...
APACHE 3 User Guide (Network Bridge Version)
Introduction The APACHE 3 USV User Guide describes how to set up and use the CHC® APACHE 3 USV. In this manual, “the USV” refers to the APACHE 3 USV unless otherwise stated. Even if you have used other Unmanned Surface Vessel before, CHC recommends ...
APACHE 3 User Guide (4G Version)
Introduction The APACHE 3 USV User Guide describes how to set up and use the CHC® APACHE 3 USV. In this manual, “the USV” refers to the APACHE 3 USV unless otherwise stated. Even if you have used other Unmanned Surface Vessel before, CHC recommends ...
IMU Trajectory Batch Processing
Important Information Disclaimer Thank you for purchasing YellowScan. The present document aims at giving you simple and straight forward directions on how to run batch trajectory corrections using the POSPac batch manager. Please read the full ...
Processing L1 Data with DJI Terra
1. Prepare Your Computer For L1 data processing, the computer must be equipped with an NVIDIA graphics card and at least 4 GB of VRAM. The CPU must be i5 or above, and 4 GB of memory is required for storing every 1 GB of raw point cloud files. You ...