DJI Battery Disposal Guide

DJI Battery Disposal Guide

Step 1. Install the battery to aircraft or use the battery to charge the mobile devices via a Battery to Power Bank Adapter, with this way, 
to discharge the battery until the battery turns off.

Step 2. Please immerse the battery in brine with a concentration of 5% or so (for example, the mixture of 50 grams of salt and 1 kilogram 
of water) for 8 to 12 hours, to make the battery fully discharged. Then the battery can be regarded as safe.

Step 3. After the battery is fully discharged, please dispose of the battery in accordance with the regulation regarding battery recycling 
and disposal in your local area.

Notes: If the battery is too swollen to be installed to the aircraft to be discharged, or it just cannot be turned on, please directly 
immerse the battery to saltwater with a concentration of 5% or so for 24 to 48 hours to get it fully discharged.

Please must use salt water to immerse the battery. With tap water, the battery cannot be fully discharged and such operation even may 
cause a potential safety hazard.

Please scrap or dispose of the battery as per local laws and regulations regarding battery recycling and disposal. We prohibit from using 
the swollen battery, DJI will take no responsibility for the accident caused by customers continuing to use the swollen battery.

    • Related Articles

    • DJI L1 Field Operation Guide

      1. RTK/PPK For the purpose of point cloud data processing, L1 needs to have centimeter-accurate positioning data with either RTK or PPK. The RTK FIX statis needs to be maintained throughout the duration of the L1 flight mission. If RTK connection ...

    • DJI Mavic 3 Enterprise First-time Survey Setup Guide

      1. Preparation 1. Hardware Mavic 3 Enterprise (M3E) with Battery Charged RC Pro Enterprise (Model: RM510B) Remote Controller (RC) D-RTK 2 Mobile Station (DRTK2) (Not required if using NTRIP Network RTK, PPK or GPS only) Micro SD card (to be inserted ...

    • Phantom 4 RTK Network RTK Setup Guide

      1. Insert a WB37 Intelligent battery into the Phantom 4 RTK remote controller, turn on the remote controller by quickly press twice and then hold the power button. 2. Insert a Phantom 4 Intelligent Flight Battery into the Phantom 4 RTK aircraft and ...

    • Export the Flight Battery Logs

      1) Insert the TB60 intelligent flight battery requiring log export into the intelligent battery station. Connect the intelligent  battery station to the remote controller using a USB-C cable. Turn on the Battery Station and remote controller. 2) ...

    • DJI Inspection Guidelines

      DJI Inspection Guidelines It is important to inspect your aircraft before, during and after each flight. To fly responsibility, you must make sure that your aircraft is in proper flying condition before taking off. You can ensure that your drone or ...