Disable the speaker on the Stonex S10 GNSS receiver

Disable the speaker on the Stonex S10 GNSS receiver


First, you will have to log in to the WebUI interface of the receiver. In order to do so, you will need to use an internet-enabled device such as phone/laptop/PC.

- Click on the network options, find the Stonex S10 receiver with respect to its serial number (located on the bottom of the receiver) and connect.
- Once connected, go to your preferred internet browser (chrome, explorer) and insert the following IP address: http://192.168.10.1.

- Insert the credentials and sign in using:
      Username: admin                          
      Password: password


- You will be directed to the main menu. Click ‘Settings’ on the top right-hand side. 



- Click on ‘Device configuration’ and scroll down till you will find the setting for the ‘Speaker’ where you can select ‘Disable’.









    • Related Articles

    • Disable the speaker on the Stonex S900 GNSS receiver

      - You will have to log in to the WebUI interface of the receiver. In order to do so, you will need to use an internet-enabled device such as phone/laptop/PC. - Click on the network options, find the Stonex S10 receiver with respect to its serial ...
    • Stonex GNSS raw data download options

      There are three different ways you can download static data from Stonex receivers: 1.     multi-pork link cable.  You connect the cable to the 7-pins Lemo port of the receiver and insert the USB port to your PC.   2.     SD card. The SD card is ...
    • Stonex S10 GNSS Receiver Registration via WebUI

      - To access the Stonex S10 WebUI, first power on your receiver. Once powered on, find your device serial number under the available WiFi networks and connect. Note that the serial number is placed at the bottom of your receiver. - Once Connected, go ...
    • Stonex S900 GNSS Receiver Registration via WebUI

      - To access the Stonex S900 WebUI, first power on your receiver. Once powered on, find your device serial number under the available WiFi networks and connect. Note that the serial number is placed at the bottom of your receiver. - Once Connected, go ...
    • Stonex S900 WebUI overview

      To access the Stonex S900 WebUI, first power on your receiver. Once powered on, find your device serial number under the available WiFi networks and connect. Note that the serial number is placed at the bottom of your receiver. Once Connected, go to ...