GeoGis software overview

GeoGis software overview





                  i.                Status bar


                  ii.                Main menu icon




                               a.    GPS preferences





                                                             
                                                                              GPS Settings


                                            b. Program preferences




                                                                              General Preferences


                                                          

                                           c.     Program preferences



                                            d.    Data transfer



                  iii.                Toolbar











    • Related Articles

    • Stonex S900 WebUI overview

      To access the Stonex S900 WebUI, first power on your receiver. Once powered on, find your device serial number under the available WiFi networks and connect. Note that the serial number is placed at the bottom of your receiver. Once Connected, go to ...

    • Resetting Stonex Receiver WebUI Credentials

      Issue: Stonex WebUI credentials - can’t recall the password.   Solution: Reset the credentials. To do this, see below: ​ Send the following command to restore to factory settings, the username and password on the WebUI: ...

    • Logging Static data with Stonex S900 using Carlson Surv software (Version 6.01)

        1. Log raw data settings in the Carlson Surv software In this guide, we assume that the user has already configured the parameters for both receivers operating as base and rover of their RTK system. Click on the icon of your Carlson Surv software, ...

    • Stonex M6 laser distance meter

      Below you will find an overview of the Stonex M6 distance laser meter. Functions Indirect Measurement This device can measure distance to inaccessible points, such as the distance to a wall which is blocked by obstacles, or the height of a tree, ...

    • Stonex S10 height measurements

      Note that in Carlson Surv software, the antenna height can be recorded either as vertical or slant. The vertical ‘Vert’ height is measured vertically up until the ground to the bottom of the receiver, while the ‘Slant’ refers to the height measured ...