How To Assemble The Trinity F90

How To Assemble The Trinity F90



WARNING: Never remove or insert the payload compartment while the Trinity F90+ has a battery installed. It can short-circuit the PMB.

    • Related Articles

    • Get Started With PPK On Trinity F90

      Getting Started The Trinity F90+ PPK module (standard on all Trinity F90+ drones) enables high-precision mapping without the need for ground control maps. You can achieve centimetre-level precision through the relative comparison of Trinity F90+ raw ...
    • Trinity F90: Download FlyLOG

      The FlyLog contains all the coordinates of the pictures that are recorded during the flight. FlyLogs are generated during the flight and saved on the autopilot board of the Trinity F90+. With the help of QBase it is possible to transfer the FlyLog ...
    • Accuracy of Trinity F90 Outputs

      It is very important to assess the accuracy of your survey results. These accuracies will determine what applications the Trinity F90+ can be used for. Spatial Resolution The quality of the imagery determines the accuracy. This image quality is ...
    • Trinity F90: Download QBase Modem Driver

      For the connection between QBase and the Trinity F90+ via the QBase modem a driver is required. If you have problems connecting the Trinity F90+ to your computer via the QBase modem, make sure the driver is installed. The required driver can be found ...
    • Trinity F90: Update the Payload Management Board (PMB)

      Start QBase. Select Updates and select Search Updates. Select Update and confirm with Yes.      Please follow the steps as described in QBase. Thereby, please pay special attention to FIRST select Detect Device and AFTERWARDS to connect the payplad ...