How to Pair the Boat with Remote Controller

Prerequisites:

1. Boat（GD100）with batteries
   
2. 5GHZ antenna
   
3. PC with WIFI
   

Steps:

1. Power on the boat and install 5GHZ antenna on the boat.

2. Power off remote control

1. Note: short press one time and long press the power button to power off the remote control. then you can see the indicator light gradually go off
   

3. Connect the boat WIFI, logon the webpage: http://192.168.53.254/pc/login.html?v=4

      Username: admin

      Password: Admin1234

4. Click ‘System Setup’ -> ‘Remote Control Settings’ select ‘Opening Match’.

5. Power on the remote control

      Note: short press one time and long press the power button to power up the remote control. then you can see the indicator lights gradually light on. If       there is no sound that come from remote control, that mean it has successfully paired each other.

• Related Articles

• APACHE 3 User Guide (Network Bridge Version)

  Introduction The APACHE 3 USV User Guide describes how to set up and use the CHC® APACHE 3 USV. In this manual, “the USV” refers to the APACHE 3 USV unless otherwise stated. Even if you have used other Unmanned Surface Vessel before, CHC recommends ...

• APACHE 3 User Guide (4G Version)

  Introduction The APACHE 3 USV User Guide describes how to set up and use the CHC® APACHE 3 USV. In this manual, “the USV” refers to the APACHE 3 USV unless otherwise stated. Even if you have used other Unmanned Surface Vessel before, CHC recommends ...

• Apache 3 Post Processing

• How to Post-Process Apache 3 data

  Prerequisites: Hydrosurvey（version 2021/12/16 or above） Hydrosurvey projects Steps: 1. Handle the wrong depth       a. Go to ‘Depth sample’ interface       b. Delete the obviously wrong depth from the dep files list one by one. Double click the dep ...

• Apache 3 Hardware Installation Video (Network Bridge Package)