Stonex M6 laser distance meter

Stonex M6 laser distance meter


Below you will find an overview of the Stonex M6 distance laser meter.

Functions

Indirect Measurement

This device can measure distance to inaccessible points, such as the distance to a wall which is blocked by obstacles, or the height of a tree, using trigonometric function. To ensure measuring accuracy, indirect measurement should be based on the following conditions: (1) The measuring points of the object which is to be measured should be on the same horizontal or vertical line. (2) Put the device at a fixed but horizontally and vertically rotary tripod.

Indirect Measurement: Pythagoras Two Points

- The device will automatically determine the longer distance as triangle’s hypotenuse, and shorter distance as right- angle side.

- When measuring right-angle side (Distance 2 in Figure A), user should ensure laser beam is right-angled to the target line. Differently, error message, failure to take a measurement.

        

Indirect Measurement: Pythagoras Three Points

- The device will automatically determine the longer distance as triangle’s hypotenuse, and shorter distance as right- angle side.

- When measuring right-angle side (Distance 2 in Figure B), user should ensure laser beam is right-angled to the target line.

                      

Angle Measurement 

Measures the tilt and the distance.

    

Auto Horizontal Measurement

Measures tilt and hypotenuse distance (1), results of tilt, distance of hypotenuse and two right-angle sides will be seen on display as seen in Figure (D).

                                                                                            

Auto Height Measurement

Measures distance to the top and to the bottom of the object, distance of two hypotenuse, and height of object will be seen on display as seen in Figure (E).

                                                                                      

Triangle Area Measurement

Measures three sloping sides respectively, the area of triangle will be displayed in the result bar.

                 

 

Attractive Features

G-Sensor

It includes an integrated tilt sensor which enables measurements of distance and heights with high accuracy.

Bluetooth

STONEX M6 laser distance meter’s Bluetooth is used for interactions with Android and iOS devices on their corresponding App, such as data transfer, remote control and more.

Staking out Measurement

It allows the user to increase or decrease the value until the desired distance is reached and the user can stake out the measurement.







    • Related Articles

    • Resetting Stonex Receiver WebUI Credentials

      Issue: Stonex WebUI credentials - can’t recall the password.   Solution: Reset the credentials. To do this, see below: ​ Send the following command to restore to factory settings, the username and password on the WebUI: ...

    • Stonex S10 GNSS Receiver Registration via WebUI

      - To access the Stonex S10 WebUI, first power on your receiver. Once powered on, find your device serial number under the available WiFi networks and connect. Note that the serial number is placed at the bottom of your receiver. - Once Connected, go ...

    • Stonex S900 GNSS Receiver Registration via WebUI

      - To access the Stonex S900 WebUI, first power on your receiver. Once powered on, find your device serial number under the available WiFi networks and connect. Note that the serial number is placed at the bottom of your receiver. - Once Connected, go ...

    • Prompt static data logging via Stonex WebUI

      -        Turn on the Wi-Fi in your PC or electronic device (i.e., smartphone) -        Search for the Stonex receiver as a WiFi network with respect to its serial number and connect. The serial number is located at the bottom of the receiver.   ...

    • Stonex S900 WebUI overview

      To access the Stonex S900 WebUI, first power on your receiver. Once powered on, find your device serial number under the available WiFi networks and connect. Note that the serial number is placed at the bottom of your receiver. Once Connected, go to ...