Stonex S900 GNSS Receiver Registration via WebUI

Stonex S900 GNSS Receiver Registration via WebUI


- To access the Stonex S900 WebUI, first power on your receiver. Once powered on, find your device serial number under the available WiFi networks and connect. Note that the serial number is placed at the bottom of your receiver.


- Once Connected, go to your preferred internet browser and insert the IP address: http://192.168.10.1 . You will then have the following pop-up window: 

- Insert the credentials:

Username: admin

Password: password


- Now, you are on the S900 WebUI main page. Here, you will be able to view all the information about your S900 receiver.

- Go to ‘Management’. Under Registration << AuthCode insert the registration code provided by your dealer and hit Submit.






    • Related Articles

    • Stonex S10 GNSS Receiver Registration via WebUI

      - To access the Stonex S10 WebUI, first power on your receiver. Once powered on, find your device serial number under the available WiFi networks and connect. Note that the serial number is placed at the bottom of your receiver. - Once Connected, go ...

    • Prompt static data logging via Stonex WebUI

      -        Turn on the Wi-Fi in your PC or electronic device (i.e., smartphone) -        Search for the Stonex receiver as a WiFi network with respect to its serial number and connect. The serial number is located at the bottom of the receiver.   ...

    • Stonex S900 WebUI overview

      To access the Stonex S900 WebUI, first power on your receiver. Once powered on, find your device serial number under the available WiFi networks and connect. Note that the serial number is placed at the bottom of your receiver. Once Connected, go to ...

    • Resetting Stonex Receiver WebUI Credentials

      Issue: Stonex WebUI credentials - can’t recall the password.   Solution: Reset the credentials. To do this, see below: ​ Send the following command to restore to factory settings, the username and password on the WebUI: ...

    • Disable the speaker on the Stonex S10 GNSS receiver

      First, you will have to log in to the WebUI interface of the receiver. In order to do so, you will need to use an internet-enabled device such as phone/laptop/PC. - Click on the network options, find the Stonex S10 receiver with respect to its serial ...