Trinity F90: Download QBase Modem Driver

Trinity F90: Download QBase Modem Driver

For the connection between QBase and the Trinity F90+ via the QBase modem a driver is required. If you have problems
connecting the Trinity F90+ to your computer via the QBase modem, make sure the driver is installed.

The required driver can be found in the Windows directory: Programs --> Quantum Systems --> QBase 3D --> Drivers --> QBase
Modem

Open CDM21228_Setup.exe and follow the instructions of the installation guide.

    • Related Articles

    • Trinity F90: Download FlyLOG

      The FlyLog contains all the coordinates of the pictures that are recorded during the flight. FlyLogs are generated during the flight and saved on the autopilot board of the Trinity F90+. With the help of QBase it is possible to transfer the FlyLog ...
    • Trinity Pro Activation Procedure and First Time Updates

      Intro: Hello and welcome to Measur's knowledge base! In this article, we will go over how to get set up with a Quantum Systems account and activate your new Trinity Pro! Step 1: Create a Quantum Systems Portal Account Firstly, please set up a QS ...
    • Trinity F90: Update the Payload Management Board (PMB)

      Start QBase. Select Updates and select Search Updates. Select Update and confirm with Yes.      Please follow the steps as described in QBase. Thereby, please pay special attention to FIRST select Detect Device and AFTERWARDS to connect the payplad ...
    • Trinity F90: How To Bind RC Transmitter to Trinity F90

      1. Please open QBase. 2. Select Updates in the main menu. 3. Select Reset RC. 4. Make sure the RC is turned off. 5. Connect the Trinity to your computer via the magnetic USB cable and make sure the connection is established, indicated by the green ...
    • Trinity F90: How To Calibrate The Magnetometer

      If the heading of the Trinity F90+ is not correct, the magnetometer needs to be re-calibrated. The heading is checked before each flight. The heading is not correct if the direction of the Trinity F90+ displayed in QBase does not align with the ...