Trinity F90: How To Update RC Transmitter Firmware

Trinity F90: How To Update RC Transmitter Firmware

1. Connect the USB cable to the Mini USB port on the back of the transmitter and connect the transmitter to your
computer, laptop or tablet.
2. The transmitter is switched on.
3. Select USB data connection.
4. The transmitter COCKPIT_C3 is now displayed in the file explorer of your PC.
5. Delete all folders in the COCKPIT_C3 directory.
6. Unpack the new firmware .zip file.
7. Insert all subfolders of the firmware folder into COCKPIT_C3.
8. Disconnect the USB connection between the transmitter and your computer, laptop or tablet.
9. Push the left transition button and the power button simultaneously until the red LED starts rotating.
10. The LED on the transmitter starts rotating. The transmitter starts to update.
11. The update is finished when the display switches on and the lights are yellow.

    • Related Articles

    • Trinity F90: How To Bind RC Transmitter to Trinity F90

      1. Please open QBase. 2. Select Updates in the main menu. 3. Select Reset RC. 4. Make sure the RC is turned off. 5. Connect the Trinity to your computer via the magnetic USB cable and make sure the connection is established, indicated by the green ...

    • DJI-M300 RTK - How to update the firmware

      Update Remote Controller Turn on the controller, make sure the controller is connected to the internet. Click on the firmware update notification to download all updates.  Battery Station Activation Must be activated before use        - Solid yellow ...

    • Trinity F90: Update the ESC

      The update is shown in QBase  > Updates > Search Updates. Please follow the instructions of the ESC update. Please select the downloaded  ESC firmware (.hex.bin file ) in the User > Documents > QBase > Firmware > ESC folder. 

    • How to update APACHE Firmware via Webpage

      Prerequisites: Boat（GD100）with batteries 5GHZ antenna PC with WIFI Note: the new firmware should be compatible with the new software that come with the released firmware. Steps: 1. Power on the boat and install 5GHZ antenna on the boat. 2. Connect ...

    • Trinity F90: Update the Payload Management Board (PMB)

      Start QBase. Select Updates and select Search Updates. Select Update and confirm with Yes.      Please follow the steps as described in QBase. Thereby, please pay special attention to FIRST select Detect Device and AFTERWARDS to connect the payplad ...