Stonex S900 height measurements

Note that the S900 receiver has an indication on top of the blue ribbon for slant height measurements, as shown below.

     

Note that in Carlson Surv software, the antenna height can be recorded either as vertical or slant. The vertical ‘Vert’ height is measured vertically up until the ground to the bottom of the receiver, while the ‘Slant’ refers to the height measured from the ground up to the top of the blue ribbon.

• Related Articles

• Stonex S10 height measurements

  Note that in Carlson Surv software, the antenna height can be recorded either as vertical or slant. The vertical ‘Vert’ height is measured vertically up until the ground to the bottom of the receiver, while the ‘Slant’ refers to the height measured ...

• Stonex S900 WebUI overview

  To access the Stonex S900 WebUI, first power on your receiver. Once powered on, find your device serial number under the available WiFi networks and connect. Note that the serial number is placed at the bottom of your receiver. Once Connected, go to ...

• Logging Static data with Stonex S900 using Carlson Surv software (Version 6.01)

    1. Log raw data settings in the Carlson Surv software In this guide, we assume that the user has already configured the parameters for both receivers operating as base and rover of their RTK system. Click on the icon of your Carlson Surv software, ...

• Stonex M6 laser distance meter

  Below you will find an overview of the Stonex M6 distance laser meter. Functions Indirect Measurement This device can measure distance to inaccessible points, such as the distance to a wall which is blocked by obstacles, or the height of a tree, ...

• Prompt static data logging via Stonex WebUI

  -        Turn on the Wi-Fi in your PC or electronic device (i.e., smartphone) -        Search for the Stonex receiver as a WiFi network with respect to its serial number and connect. The serial number is located at the bottom of the receiver.   ...