Popular Articles
How To Use DJI D-RTK2 Base Station As GNSS Rover (Network)
Introduction The purpose of this document is to show our users how to connect to a custom network with the D-RTK 2 to acquire latitude, longitude, and height. What You Will Need D-RTK 2 on firmware v02.02.0014 or later. Phantom 4 Remote Controller ...
Static (.dat) To RINEX conversion tool by Stonex
This tool is used to convert the .dat (binary) file of the static data logged on the Stonex GNSS receiver to Rinex (ASCII) format. In case the user has already selected in the receiver’s WebUI to convert the static file from .dat to Rinex, this ...
Processing L1 Data with DJI Terra
1. Prepare Your Computer For L1 data processing, the computer must be equipped with an NVIDIA graphics card and at least 4 GB of VRAM. The CPU must be i5 or above, and 4 GB of memory is required for storing every 1 GB of raw point cloud files. You ...
Quick start user guide - RTK setup using Fieldgenius
1. Configure base and rover settings Double click on the Fieldgenius app located at the desktop of your data collector. In our case, we are using a Mesa 2. In the ‘Project Manager’, select an existing project and click ‘Open’ or hit ‘New Project’ ...
LP12 Searchlight & Broadcasting System - User Manual
1. Introduction of LP12 CZI LP12 searchlight & broadcasting system is a two-in-one payload specially designed for the DJI M30. LP12 is with a streamlined aesthetic design concept. It challenges the limits of performance while maintaining artistic ...