Geode sub meter receiver - iOS devices compatibility

The Geode GNS2 retains all the features of the original Geode with the addition of iPhone and iPad compatibility. The original Geode does not work with iPhone or iPad. The Geode is an all-in-one sub-meter receiver that provides users with real-time, precision GNSS data.  The Geode features one-button simplicity and can be used with any of Juniper Systems’ handhelds, as well as a wide range of Windows, Windows Mobile, Android and now iPhone and iPad devices.  This open operating system is particularly useful for bring-your-own-device workplaces. Accessories for the Geode are compatible with the original Geode and Geode GNS2. Model information can be found on the label located on the underside of each Geode. All Geode GNS2 models are indicated with "GNS2" to the right of the Geode logo, as seen in the image below.

The release of the Geode GNS2 also brings the Geode Connect app to the App Store.  This release of the Geode’s companion app for iPhone and iPad includes a new battery monitoring function that allows the user to see the battery status of the Geode while in the field.  This also lets the user see the Geode’s charging status while the device is plugged in.

Original source: https://www.pobonline.com/articles/101867-juniper-systems-releases-sub-meter-gps-receiver

• Related Articles

• Connect Geode To An Android Device

  Instructions for setting up Geode with Android.  1. Download and install Geode Connect from the Playstore ( use it to pair with the Geode). 2. Turn On the Geode. 3. Run the Geode Connect App: Tap up top where it says "No Device".  4. Select your ...

• Stonex M6 laser distance meter

  Below you will find an overview of the Stonex M6 distance laser meter. Functions Indirect Measurement This device can measure distance to inaccessible points, such as the distance to a wall which is blocked by obstacles, or the height of a tree, ...

• Change the Juniper Geode BAUD Rate

  Option 1: (Recommended method) Through the Bluetooth connection: Instructions for Android: Preparation steps.  Connect via Bluetooth to the Geode using Geode Connect. Go to the Terminal Screen. Located next to the gear icon at the bottom of the app. ...

• Disable the speaker on the Stonex S10 GNSS receiver

  First, you will have to log in to the WebUI interface of the receiver. In order to do so, you will need to use an internet-enabled device such as phone/laptop/PC. - Click on the network options, find the Stonex S10 receiver with respect to its serial ...

• Resetting Stonex Receiver WebUI Credentials

  Issue: Stonex WebUI credentials - can’t recall the password.   Solution: Reset the credentials. To do this, see below: ​ Send the following command to restore to factory settings, the username and password on the WebUI: ...