Firmware Upgrade and Motherboard

• Related Articles

• Stonex S900 WebUI overview

  To access the Stonex S900 WebUI, first power on your receiver. Once powered on, find your device serial number under the available WiFi networks and connect. Note that the serial number is placed at the bottom of your receiver. Once Connected, go to ...

• Resetting Stonex Receiver WebUI Credentials

  Issue: Stonex WebUI credentials - can’t recall the password.   Solution: Reset the credentials. To do this, see below: ​ Send the following command to restore to factory settings, the username and password on the WebUI: ...

• Stonex S10 GNSS Receiver Registration via WebUI

  - To access the Stonex S10 WebUI, first power on your receiver. Once powered on, find your device serial number under the available WiFi networks and connect. Note that the serial number is placed at the bottom of your receiver. - Once Connected, go ...

• Stonex S900 GNSS Receiver Registration via WebUI

  - To access the Stonex S900 WebUI, first power on your receiver. Once powered on, find your device serial number under the available WiFi networks and connect. Note that the serial number is placed at the bottom of your receiver. - Once Connected, go ...

• Prompt static data logging via Stonex WebUI

  -        Turn on the Wi-Fi in your PC or electronic device (i.e., smartphone) -        Search for the Stonex receiver as a WiFi network with respect to its serial number and connect. The serial number is located at the bottom of the receiver.   ...