LP12 Firmware Upgrade

LP12 Firmware Upgrade

Introduction

In this article, you can find the instructions on how to upgrade the firmware for, new features about and the fix issues for the LP12.

New Features

1. Adding live broadcasting function, it needs DJI pilot 2 update to support, expect pilot 2 to support LP12 live broadcasting at the end of June 2022.
2. Adding long text TTS function, it needs to be supported by pilot 2 after update, expect pilot 2 to support LP12 TTS long text function at the end of June 2022.

Fix Issues

1. solved the problem that playing some songs with high concentration frequency  may cause the drone IMU to be abnormal.
2. solved the problem that when playing some noisy songs, there is a probability of burning out the speaker when playing for a long time.
3. Fix other known problems.

Instructions

1. install the LP12 to the M30 series drone, plug the LP12's power supply communication cableinto the OSDK interface of the drone, paying attention to the direction of insertion.
2. use the type-c data cable to connect the debug port of the drone to the USB port of thecomputer, the computer opens the DJI Assistant 2 (Enterprise Series) software, and the droneis turned on.
3. After completing the above steps, follow the steps in the following pictures to upgrade:




Note: The ".bin" file shown in the picture above is attached in this article and can be downloaded.






Note: When it shows "upgrading.... .100%", LP12 will automatically upgrade and broadcast, during the upgrade process, speaker and light will restart. when the light restart, it means the upgrade is successful, at this time DJI Assistant 2 (Enterprise Series) can be closed and exit.




    • Related Articles

    • V4 Firmware Temporary Solution

      The M300 RTK batteries do not work after upgrading the firmware, DJI is working on discovering a solution urgently. Until then, please refer to the instructions below in order to obtain a temporary solution to this problem provided by DJI. 1. Please ...

    • EVO II: How to Upgrade Firmware

    • DJI-M300 RTK - How to update the firmware

      Update Remote Controller Turn on the controller, make sure the controller is connected to the internet. Click on the firmware update notification to download all updates.  Battery Station Activation Must be activated before use        - Solid yellow ...

    • DJI M300 RTK Verification Standards

      M300RTK VIDEO VERIFICATION STANDARDS Before shooting the video, please pay attention to the instructions below. -  Show the aircraft, remote controller, and app in the same shot.  -  Please shoot the video in a safe, bright and outdoor area. -  ...

    • DJI Inspection Guidelines

      DJI Inspection Guidelines It is important to inspect your aircraft before, during and after each flight. To fly responsibility, you must make sure that your aircraft is in proper flying condition before taking off. You can ensure that your drone or ...