QBase License Update

1. Find out your autopilots serial number

2. Request license via email from Quantum-Systems

Provide:

      • Aircraft type

      • Aircraft serial number

      • Autopilot serial number

3. Go to license flashing dialog in Updates menu

4. Follow license update process as depicted

5. When aircraft appears, select license file (*.lic)

6. Check if license was applied

• Related Articles

• Trinity F90: Update the ESC

  The update is shown in QBase  > Updates > Search Updates. Please follow the instructions of the ESC update. Please select the downloaded  ESC firmware (.hex.bin file ) in the User > Documents > QBase > Firmware > ESC folder. 

• Trinity Pro Activation Procedure and First Time Updates

  Intro: Hello and welcome to Measur's knowledge base! In this article, we will go over how to get set up with a Quantum Systems account and activate your new Trinity Pro! Step 1: Create a Quantum Systems Portal Account Firstly, please set up a QS ...

• Trinity F90: Update the Payload Management Board (PMB)

  Start QBase. Select Updates and select Search Updates. Select Update and confirm with Yes.      Please follow the steps as described in QBase. Thereby, please pay special attention to FIRST select Detect Device and AFTERWARDS to connect the payplad ...

• How to update APACHE Firmware via Webpage

  Prerequisites: Boat（GD100）with batteries 5GHZ antenna PC with WIFI Note: the new firmware should be compatible with the new software that come with the released firmware. Steps: 1. Power on the boat and install 5GHZ antenna on the boat. 2. Connect ...

• DJI-M300 RTK - How to update the firmware

  Update Remote Controller Turn on the controller, make sure the controller is connected to the internet. Click on the firmware update notification to download all updates.  Battery Station Activation Must be activated before use        - Solid yellow ...