There are a lot of data formats which can be exported from Hydrosurvey software. Please see below for further explanations. 1. X, Y X,Y is under local Geographic coordinate system, X represents for N, Y represents for E, it is under Geographic ...
Introduction The APACHE 3 USV User Guide describes how to set up and use the CHC® APACHE 3 USV. In this manual, “the USV” refers to the APACHE 3 USV unless otherwise stated. Even if you have used other Unmanned Surface Vessel before, CHC recommends ...
Introduction The APACHE 3 USV User Guide describes how to set up and use the CHC® APACHE 3 USV. In this manual, “the USV” refers to the APACHE 3 USV unless otherwise stated. Even if you have used other Unmanned Surface Vessel before, CHC recommends ...
Prerequisites: Boat（GD100）with batteries 5GHZ antenna PC with WIFI Steps: 1. Power on the boat and install 5GHZ antenna on the boat. 2. Power off remote control Note: short press one time and long press the power button to power off the remote ...
Prerequisites: Hydrosurvey（version 2021/12/16 or above） Hydrosurvey projects Steps: 1. Handle the wrong depth a. Go to ‘Depth sample’ interface b. Delete the obviously wrong depth from the dep files list one by one. Double click the dep ...
Prerequisites: Boat（GD100）with batteries 5GHZ antenna PC with WIFI Note: the new firmware should be compatible with the new software that come with the released firmware. Steps: 1. Power on the boat and install 5GHZ antenna on the boat. 2. Connect ...