Stonex S900
Logging Static data with Stonex S900 using Carlson Surv software (Version 6.01)
1. Log raw data settings in the Carlson Surv software In this guide, we assume that the user has already configured the parameters for both receivers operating as base and rover of their RTK system. Click on the icon of your Carlson Surv software, ...
Stonex S900 WebUI overview
To access the Stonex S900 WebUI, first power on your receiver. Once powered on, find your device serial number under the available WiFi networks and connect. Note that the serial number is placed at the bottom of your receiver. Once Connected, go to ...
Stonex S900 GNSS Receiver Registration via WebUI
- To access the Stonex S900 WebUI, first power on your receiver. Once powered on, find your device serial number under the available WiFi networks and connect. Note that the serial number is placed at the bottom of your receiver. - Once Connected, go ...
Disable the speaker on the Stonex S900 GNSS receiver
- You will have to log in to the WebUI interface of the receiver. In order to do so, you will need to use an internet-enabled device such as phone/laptop/PC. - Click on the network options, find the Stonex S10 receiver with respect to its serial ...
Stonex S900 height measurements
Note that the S900 receiver has an indication on top of the blue ribbon for slant height measurements, as shown below. Note that in Carlson Surv software, the antenna height can be recorded either as vertical or slant. The vertical ‘Vert’ ...