Trinity F90: How To Bind RC Transmitter to Trinity F90
1. Please open QBase.
2. Select Updates in the main menu.
3. Select Reset RC.
4. Make sure the RC is turned off.
5. Connect the Trinity to your computer via the magnetic USB cable and make sure the connection is established, indicated
by the green connection symbol in the top right corner of QBase.
6. Please follow the steps in QBase.
Related Articles
Trinity F90: How To Update RC Transmitter Firmware
1. Connect the USB cable to the Mini USB port on the back of the transmitter and connect the transmitter to your computer, laptop or tablet. 2. The transmitter is switched on. 3. Select USB data connection. 4. The transmitter COCKPIT_C3 is now ...
Trinity F90: How To Calibrate The Magnetometer
If the heading of the Trinity F90+ is not correct, the magnetometer needs to be re-calibrated. The heading is checked before each flight. The heading is not correct if the direction of the Trinity F90+ displayed in QBase does not align with the ...
Trinity F90: Emergency Commands
EMERGENCY COMMANDS DURING THE FLIGHT 1. Select COMING HOME to abort the mission. The Trinity F90+ enters the re-transition as defined in QBase and hovers to Base automatically. 2. Select EMERGENCY --> Land Immediately to initiate the retransition ...
How To Assemble The Trinity F90
WARNING: Never remove or insert the payload compartment while the Trinity F90+ has a battery installed. It can short-circuit the PMB.
Trinity F90: Download QBase Modem Driver
For the connection between QBase and the Trinity F90+ via the QBase modem a driver is required. If you have problems connecting the Trinity F90+ to your computer via the QBase modem, make sure the driver is installed. The required driver can be found ...